■ 燃氣發電機組選型說明
■ The Introduction of the Gas Gensets Model Selection.
- 選擇燃料氣源，分析氣源成份及確認氣源物理狀態參數
- Choose the gas source,analyze the composition and confirm the physical state parameters of gas soures.
- 燃氣主要成份：Combustible gas composition:
成份名稱
Composition name | CH4 | C2H6 | C3H8 | C4H10 | C5H12 | CO | H2 | CO2 | N2 |
所占比例
Proportion | | | | | | | | | |
- 燃氣所含雜質的成份：Impurities composition:
成份名稱
Composition name | H2S | SO2 | H2O mg/m³ | 焦油Tar
mg/m³ | 固體顆粒 Solid
Particles mg/ m³ | 其他顆粒 Others mg/ m³ |
所占比例
Proportion | | | | | | |
- 物理條件及氣源氣量：Physical conditions and gas source amount:
項目名稱
Item name | 燃氣壓力 kpa
Gas pressure kpa | 燃氣溫度 gas
Tempreture ℃ | 環境溫度 ℃
Ambient
temoreture ℃ | 海拔高度
Sea level
height M | 燃氣氣源氣量
Gas source amount
m³/h |
項目數值
Item value | | | | | |
- 您所需燃氣發電機組的參數：Gas Genset Parameter:
機組功率
Genset Power kw | 發電機功率Generator capadity kw
| 相數
Phase | 電壓 V
Voltage V | 頻率 Hz
Frequency hz | 發動機轉速 rpm Engine speed rpm |
| | | | | | |
- 根據燃氣低熱值及燃氣氣量，估算機組功率或根據燃氣低熱值及所需功率估算燃氣耗氣量
- According to the calorific value of gas and amount,we can estimate the power of the gensets and the consumption.
- 各種氣源耗氣量簡單粗略估算數據
- Estimated date of gas consumption for different gas source.
為便于用戶在選型之初的粗略估算，現將每發1度電（即1KWH）各種氣源的耗氣量整理如下：
In order to help the users estimate the date easily before model selection,we list the gas consumption for 1 kwh as follows:
●天燃氣（CH4 98%,C3H8 0.3%,C4H10 0.3%,C5H12 0.4%）Natural Gas 0.32立方米/1度電m³/1 kwh
●液化石油氣（C3H8 100%）LPG 0.13立方米/1度電m³/1 kwh
●養豬場（CH4 62%）沼氣Pig Farm Biogas 0.5立方米/1度電m³/1 kwh
●生物質秸稈氣化（CH4 2%,CO 20%,H29%）燃氣Biomass Gasifier Gas 2.5立方米/1度電m³/1 kwh
高爐煤氣（CO 6.6%）燃氣Blast Furnace Gas 2.81立方米/1度電m³/1 kwh
●石油伴生氣（CH4 80%,C2H6 7.4%,C3H8 3.8%,C4H10 2.3%, C5H12 2.4%） 0.27立方米/1度電m³/1 kwh
Oil Field Associated Gas
